English English  |
A new single barrel plug catcher is ready to ship to our good client from Australia, here is details as below:
The trash / plug catcher is required with 3 1/16-in. 10,000-psi main flow path with dual pots and filter screens for uninterrupted operation. 3-1/16” manual gate valves are required in the main flow path and on the bypass. The bypass is designed to maintain flow when the filter is no longer required.
A two inch flushing line header is provided with stainless steel 9/16” autoclave lines to the bottom of the trash catcher pots to fill and flush the pots with water to displace any oil or gas including H2S. Stainless steel 9/16” autoclave lines are provided from the top of each vessel to a 2” discharge header to bleed off pressure as well as collect and route the displaced fluids to a flare or flare pit. The accumulated debris is recovered by removing the screens.
Features
Equipped with a bypass for continued flow.
The manifolds are constructed with 10,000-psi working-pressure flanges
ACME Thread Cap allows internal screen to be quickly inspected and/or changed.
Gate valves allow for a secure isolation and redirection of flow
Autoclave valves allow internal pressure to be bled off before flushing or retrieving the screen
Various screen sizes for different applications if required
Inconel inlay in ring grooves
Trash catcher pots with OTIS/BOWEN end cap with Stub ACME Connection
End caps with 9/16" AEHP Bleed off Port
Ports on inlet and outlet blocks to monitor pressure and differential pressure across the pots
